Barkers Engineering Limited t/a Barkers Fencing
Duke Street, Fenton
Stoke on Trent
Staffordshire
ST4 3NS
T: 01782 319264
E:
W: www.barkersfencing.com
Company
Barkers Fencing has been designing & manufacturing perimeter security solutions for more than 40 years. In that time developed an extensive service-related approach to security infrastructure projects, providing ultimate perimeter security systemsSupply Types
- Commercial Supplier/Installer
Products
Physical Perimeter Security
Product Description: Palisade Fencing
Types- Fixed
- Palisade
- Steel
- Successfully tested and approved to: PAS 68:2010 Impact test specifications for vehicle security barriers
TRL Report CPR1172 Refers
Product Description: single leaf security gate, SR2 security rated, padlock and sliding bar and or padlock and drop bolt
Types- Above ground
- Double leaf
- Inward opening
- Outward opening
- Single leaf
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Requirements and testing procedures for resistant building components, strongpoints, security enclosures and free-standing barriers
Certification held with LPCB Certificate 1198f refers
Product Description: SR2 security rated, nominal height 2.0m to 3.0m, Palisade
Types- Above ground
- Palisade
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Requirements and testing procedures for resistant building components, strongpoints, security enclosures and free-standing barriers
Certification held with LPCB Certificate 1198r refers
Product Description: SR2 security rated, minimum height 2.0m maximum height 3.0m, welded mesh
Types- Above ground
- Welded Mesh
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Requirements and testing procedures for resistant building components, strongpoints, security enclosures and free-standing barriers
Certification held with LPCB Certificate 1198e refers
Product Description: welded mesh, minimum height 2.4m, maximum height 4.2m, SR2, B3, C1
Types- Above ground
- Welded Mesh
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Requirements and testing procedures for resistant building components, strongpoints, security enclosures and free-standing barriers
Certification held with LPCB Certificate 1198m/01 refers
Product Description: minimal height 2.4m to maximum height 4.2m
Types- Above ground
- Welded Mesh
- Steel
- Certified to: LPS 1175 Issue 8 C5 SR3 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198v refers
Product Description: Welded Mesh Fencing, Nominal Height 2.4M, Security Rating SR1
Types- Above ground
- Welded Mesh
- Steel
- Certified to: LPS 1175 Issue 7 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198c/01 refers
Product Description: SR1 Security Rating, Single Leaf Height 2.4m Max Width 1.505m
Types- Double leaf
- Inward opening
- Outward opening
- Palisade
- Single leaf
- Welded Mesh
- Steel
- Certified to: LPS 1175 Issue 7 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198d/01 refers
Product Description: automatic or manual , compatible locking devices type: Locinox motorised electrical drop bolt / internal push button, key pad, free exit loop, radio fob - external access control or radio fob - Barkers Fencing drop bolt internal padlock & drop bolt
Types- Above ground
- Automatic release
- Cantilever
- Manual
- Powered
- Sliding
- Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198q/01 refers
Product Description: Double Vehicle, Fabric: Stronguard, Stronguard Plus, Inward Opening, 2.4m Span, Lock: Slide Bar and Padlock, External Release: None, Internal Release: Padlock
Types- Double leaf
- Inward opening
- Palisade
- Steel
- Successfully tested and approved to: Specialist Assessed
Product Description: Trade pattern Palisade fence with 3mm Thick D Shaped Pales with an Expanding Metal Backing Mesh, There are 24 Pales per 2.75m bay, Expanded Metal Mesh Fitted to Rear of Palisade
Types- Expanded metal
- Fixed
- Palisade
- Steel
- Successfully tested and approved to: Specialist Assessed
Product Description: Horizontal Rails at Several Heights Provide Further Forced Entry Delay, Trade Pattern Palisade fence with D Shaped Pales Anti-Cut Bars, 3m High and can be Fitted with an Additional 0.6m Barbed Tape Concertina
Types- Fixed
- Palisade
- Steel
- Successfully tested and approved to: Specialist Assessed
Product Description: trade pattern Palisade Fence with 3mm Thick D Shaped Pales, 24 Pales per 2.75m bay, Fence is 2.4m High or 3m with Topping
Types- Fixed
- Palisade
- Steel
- Successfully tested and approved to: Specialist Assessed
Product Description: Fabric: Stronguard, Stronguard Plus, Inward Opening, Span: 1.2m, Lock Mico Tindall Abryll, External Release: Key, Internal Release: Thumbturn and Handle
Types- Inward opening
- Palisade
- Steel
- Successfully tested and approved to: Specialist Assessed
Product Description: Fabric: Stonguard, Stronguard Plus, Inward Opening, Span: 1.2m, Lock: Slide Bar and Mortise Lock, External Release: Key, Internal Release: Key
Types- Inward opening
- Palisade
- Steel
- Successfully tested and approved to: Specialist Assessed
Product Description: Trade pattern Palisade fence with D Shaped Pales Incorporating Anti-Cut Bars, There are 24 pales Per 2.75m bay, The Fence is 3m High and can be Fitted With An Additional 0.6m Barbed Tape Concertina
Types- Fixed
- Palisade
- Security topping
- Steel
- Successfully tested and approved to: Specialist Assessed
Product Description: minimum hight 2m maximum height 3m, compatible locking devices padlockable slide latch - sliding bar, padlockable drop bolt
Types- Above ground
- Double leaf
- Inward opening
- Outward opening
- Single leaf
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Requirements and testing procedures for resistant building components, strongpoints, security enclosures and free-standing barriers
Certification held with LPCB Certificate 1198u refers
Product Description:
Types- Above ground
- Fixed
- Palisade
- Stainless Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198ad/01 refers
Product Description: Sliding Cantilever Gate, Fabric: Stronguard, Stronguard PLus, Opening: Sliding, Span: 3.7m, Lock: Slide Bar and Padlocks, External Release: None, Internal Release: Padlock
Types- Cantilever
- Sliding
- Steel
- Successfully tested and approved to: Specialist Assessed
Product Description: Palisade Fencing, Nominal Height 2.4M, Security Rating SR2
Types- Above ground
- Palisade
- Steel
- Certified to: LPS 1175 Issue 7 SR2 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198c/02 refers
Product Description: SR2 Security Rated, single leaf, minimal height 2m, maximum height 3m, compatible locking devices: padlockable slide latch - sliding bar, padlockable drop bolt
Types- Double leaf
- Inward opening
- Outward opening
- Single leaf
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198s refers
Product Description: Palisade Fencing, Nominal Height 3.0M, Security Rating SR3
Types- Above ground
- Palisade
- Steel
- Certified to: LPS 1175 Issue 7 SR3 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198c/03 refers
Product Description: Single Leaf Gate, Inward and Outward Opening, SR3 Security Rating, Height 3.0m, Single Leaf Inward Max Width 4.79m, Single Leaf Outward Max Width 9.7m
Types- Double leaf
- Inward opening
- Outward opening
- Palisade
- Single leaf
- Welded Mesh
- Steel
- Certified to: LPS 1175 Issue 7 SR3 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198d/03 refers
Product Description: Single full height turnstile, number of rotor arms 4
Types- Above ground
- Barrier
- Turnstile
- Steel
- Certified to: LPS 1175 Issue 8 A1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198k/01 refers
Product Description: Single full height turnstile, number of rotor arms 4
Types- Above ground
- Barrier
- Turnstile
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198j/01 refers
Product Description: Single full height turnstile, number of rotor arms 4
Types- Above ground
- Barrier
- Turnstile
- Steel
- Certified to: LPS 1175 Issue 8 C5 SR3 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198i/01 refers
Product Description: SR2 security rated, welded mesh, minimum height 1.83m maximum height 3.13m
Types- Above ground
- Welded Mesh
- Steel
- Certified to: LPS 1175 Issue 8 B3 SR2 Requirements and testing procedures for resistant building components, strongpoints, security enclosures and free-standing barriers
Certification held with LPCB Certificate 1198g refers
Product Description: Min height 1.83m - Max height 3.13m
Types- Above ground
- Double leaf
- Inward opening
- Single leaf
- Steel
- Certified to: LPS 1175 Issue 8 A1 SR1 Specification for testing and classifying the burglary resistance of building components, strong-points and security enclosures.
Certification held with LPCB Certificate 1198h refers